Manufacturer of valves namely pneumatic valve, manually operated diaphragm valves, conventional control valve and pressure reducing valves.
"Our strength is in providing valves of high quality with timely delivery, at competitive rates"
 
 
  Diaphragm valves are suitable for handling sticky and viscous fluids, slurries and highly corrosive and hazardous substances.
It is needless to say that they could be used for handling air, water and  normal liquid/gas flow as well. It is the most ideal valve to handle  fluids that require high purity and  should remain free from contamination.

 
 
OUR PRODUCTS (WEIR AND STRAIGHT THROUGH)
 
 
 
 
         
  Pneumatic Valves
  Air to close actuated diaphragm valve
  Air to open actuated diaphragm valve
  Double acting actuated diaphragm valve
  Double diaphragm actuated valve (ATC &   ATO)
  Side mounted Handwheel actuator (SMH)
  Diaphragm control valve for throttling
  Cylinder Operated Valve  
  Manual Valves
  Non-Indicating stem
  Indicating stem
  Indicating stem with travel stop
  Screwed valve
  Lining for valve Body
   
  Download the Brochure
 
Manual Pneumatic
 
Salient Features
 Type: Weir/straight through
 Body Material: Cast iron/Cast steel/316 ST.ST./Gunmetal/Alloy 20 Unlined & Lined PFA, FEP, ETFE & ECTFE ( Hallar ) & PVDF Lined & Plastic Valves, etc.
 Body Rating: ANSI Class 125/150 lbs
 Body Lining: Neoprene/Natural/Rubber/Ebonite/Glass/Teflon/EPDM/FRP, Food grade etc.
 Body Diaphragm: Natural Neoprene, Hyplon, Butyl, EPDM, PTFE with neo, EPDM PAD, Viton, Nitrile Buna-N, Food grade, etc.
 End Connections: Conforming BS-5156 flanged to ANSI B-16.1 Class 125/150 lbs, DIN-3202-F1, PN-10/PN-16 etc.
 Sizes: 15mm to 350mm
 Operating Temperature: Rubber diaphragm will handle majority of the flow upto 80o C, other diaphragm materials are available for higher temperature upto 180o C
 
 Lining Hardness:
 Ebonite: 95o 5 Shore A
 Natural Rubber: 65° 5 Shore A
 Rochwell/Shores R 100 D78 or D62
 Parcol & Parcol 40 respectively
 
 Lining Thickness:
 15 to 65 mm valve. 3 mm
 80 to 100 mm valve. 3.5 mm
 125 to 150 mm valve. 4.0 mm
 200 to 350 mm valve. 5.0 mm
 Teflon lining - 1mm and 3mm
 Glass lining - 1.0 mm
 
 
  PRODUCTS
  PNEUMATIC VALVES
  MANUAL VALVES
  LININGS FOR VALVES
   
 
 
 
HOME CONTACT US FEEDBACK
Profile | Products | Quality | Clients | Consultants
101, Ark Industrial Estate ,  Off Andheri-Kurla Road,  Marol Naka, Makwana Lane,  Andheri (East)  Mumbai - 400 059  India.
This site best veiwed in Internet Explorer 5.0 or Netscape 4.5 or above in a resolution of 800x600
All contents copyrights reserved,Procon Engineers, All rights reserved.